Gembird EG-PM2-LAN Instrukcja Użytkownika Pobierz pdf (Strona 13)

EG-PM2-LAN PROGRAMMABLE POWER

OUTLET STRIP WITH LAN INTERFACE

All brands and logos are registered trademarks of their respective owners

If you choose for option B then the following procedure is required to let

EG-PM2-LAN obtain a fixed IP address:

 Turn EG-PM2-LAN on (with the Main rocker switch Z)

 Press IP Config (C) button on the side control panel (see Figure #2

above) with the tip of a pen

 While holding it pressed, press and release Reset (A) button and

wait for about 3 seconds until you hear the sockets switching twice

The above-mentioned procedure forces EG-PM2-LAN to reset itself

to the default settings (see below) ...

 IP: 192.168.0.254

 Subnet mask: 255.255.255.0

 Gateway: 192.168.0.1

 DNS:0.0.0.0

 DHCP: enabled

 IP filtering: disabled

 Power Manager client port: 5000

... EG-PM2-LAN then searches for an IP address from your eventual

DHCP server. If no DHCP server is found within 1 minute, EG-PM2-LAN

will then automatically revert to the default settings (see above, with IP:

192.168.0.254).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 64 65

Brak uwag

Gembird EG-PM2-LAN Instrukcja Użytkownika Strona 13